CModel

包	system.base
继承	abstract class CModel » CComponent
实现	IteratorAggregate, Traversable, ArrayAccess
子类	CActiveRecord, CFormModel
可用自	1.0
源码	framework/base/CModel.php

属性详情

Returns all attribute values.

Returns the errors for all attribute or a single attribute.

Returns an iterator for traversing the attributes in the model. This method is required by the interface IteratorAggregate.

Returns the attribute names that are safe to be massively assigned. A safe attribute is one that is associated with a validation rule in the current scenario.

Returns the scenario that this model is used in.

Scenario affects how validation is performed and which attributes can be massively assigned.

A validation rule will be performed when calling validate() if its 'except' value does not contain current scenario value while 'on' option is not set or contains the current scenario value.

And an attribute can be massively assigned if it is associated with a validation rule for the current scenario. Note that an exception is the unsafe validator which marks the associated attributes as unsafe and not allowed to be massively assigned.

Returns all the validators declared in the model. This method differs from getValidators in that the latter would only return the validators applicable to the current scenario. Also, since this method return a CList object, you may manipulate it by inserting or removing validators (useful in behaviors). For example, $model->validatorList->add($newValidator). The change made to the CList object will persist and reflect in the result of the next call of getValidators.

Returns the validators applicable to the current scenario.

方法详情

public void addError(string $attribute, string $error)
$attribute	string	attribute name
$error	string	new error message

Adds a new error to the specified attribute.

public void addErrors(array $errors)
$errors	array	a list of errors. The array keys must be attribute names. The array values should be error messages. If an attribute has multiple errors, these errors must be given in terms of an array. You may use the result of getErrors as the value for this parameter.

Adds a list of errors.

protected void afterConstruct()

This method is invoked after a model instance is created by new operator. The default implementation raises the onAfterConstruct event. You may override this method to do postprocessing after model creation. Make sure you call the parent implementation so that the event is raised properly.

protected void afterValidate()

This method is invoked after validation ends. The default implementation calls onAfterValidate to raise an event. You may override this method to do postprocessing after validation. Make sure the parent implementation is invoked so that the event can be raised.

public array attributeLabels()
{return}	array	attribute labels (name=>label)

Returns the attribute labels. Attribute labels are mainly used in error messages of validation. By default an attribute label is generated using generateAttributeLabel. This method allows you to explicitly specify attribute labels.

Note, in order to inherit labels defined in the parent class, a child class needs to merge the parent labels with child labels using functions like array_merge().

abstract public array attributeNames()
{return}	array	list of attribute names.

Returns the list of attribute names of the model.

protected boolean beforeValidate()
{return}	boolean	whether validation should be executed. Defaults to true. If false is returned, the validation will stop and the model is considered invalid.

This method is invoked before validation starts. The default implementation calls onBeforeValidate to raise an event. You may override this method to do preliminary checks before validation. Make sure the parent implementation is invoked so that the event can be raised.

public array behaviors()
{return}	array	the behavior configurations (behavior name=>behavior configuration)

Returns a list of behaviors that this model should behave as. The return value should be an array of behavior configurations indexed by behavior names. Each behavior configuration can be either a string specifying the behavior class or an array of the following structure:

'behaviorName'=>array(
    'class'=>'path.to.BehaviorClass',
    'property1'=>'value1',
    'property2'=>'value2',
)

Note, the behavior classes must implement IBehavior or extend from CBehavior. Behaviors declared in this method will be attached to the model when it is instantiated.

For more details about behaviors, see CComponent.

public void clearErrors(string $attribute=NULL)
$attribute	string	attribute name. Use null to remove errors for all attribute.

Removes errors for all attributes or a single attribute.

public CList createValidators()
{return}	CList	validators built based on rules().

Creates validator objects based on the specification in rules. This method is mainly used internally.

public string generateAttributeLabel(string $name)
$name	string	the column name
{return}	string	the attribute label

Generates a user friendly attribute label. This is done by replacing underscores or dashes with blanks and changing the first letter of each word to upper case. For example, 'department_name' or 'DepartmentName' becomes 'Department Name'.

public string getAttributeLabel(string $attribute)
$attribute	string	the attribute name
{return}	string	the attribute label

Returns the text label for the specified attribute.

public array getAttributes(array $names=NULL)
$names	array	list of attributes whose value needs to be returned. Defaults to null, meaning all attributes as listed in attributeNames will be returned. If it is an array, only the attributes in the array will be returned.
{return}	array	attribute values (name=>value).

Returns all attribute values.

public string getError(string $attribute)
$attribute	string	attribute name.
{return}	string	the error message. Null is returned if no error.

Returns the first error of the specified attribute.

public array getErrors(string $attribute=NULL)
$attribute	string	attribute name. Use null to retrieve errors for all attributes.
{return}	array	errors for all attributes or the specified attribute. Empty array is returned if no error.

Returns the errors for all attribute or a single attribute.

public CMapIterator getIterator()
{return}	CMapIterator	an iterator for traversing the items in the list.

Returns an iterator for traversing the attributes in the model. This method is required by the interface IteratorAggregate.

public array getSafeAttributeNames()
{return}	array	safe attribute names

Returns the attribute names that are safe to be massively assigned. A safe attribute is one that is associated with a validation rule in the current scenario.

public string getScenario()
{return}	string	the scenario that this model is in.

Returns the scenario that this model is used in.

Scenario affects how validation is performed and which attributes can be massively assigned.

A validation rule will be performed when calling validate() if its 'except' value does not contain current scenario value while 'on' option is not set or contains the current scenario value.

And an attribute can be massively assigned if it is associated with a validation rule for the current scenario. Note that an exception is the unsafe validator which marks the associated attributes as unsafe and not allowed to be massively assigned.

public CList getValidatorList()
{return}	CList	all the validators declared in the model.

Returns all the validators declared in the model. This method differs from getValidators in that the latter would only return the validators applicable to the current scenario. Also, since this method return a CList object, you may manipulate it by inserting or removing validators (useful in behaviors). For example, $model->validatorList->add($newValidator). The change made to the CList object will persist and reflect in the result of the next call of getValidators.

public array getValidators(string $attribute=NULL)
$attribute	string	the name of the attribute whose validators should be returned. If this is null, the validators for ALL attributes in the model will be returned.
{return}	array	the validators applicable to the current scenario.

Returns the validators applicable to the current scenario.

public boolean hasErrors(string $attribute=NULL)
$attribute	string	attribute name. Use null to check all attributes.
{return}	boolean	whether there is any error.

Returns a value indicating whether there is any validation error.

public boolean isAttributeRequired(string $attribute)
$attribute	string	attribute name
{return}	boolean	whether the attribute is required

Returns a value indicating whether the attribute is required. This is determined by checking if the attribute is associated with a CRequiredValidator validation rule in the current scenario.

public boolean isAttributeSafe(string $attribute)
$attribute	string	attribute name
{return}	boolean	whether the attribute is safe for massive assignments

Returns a value indicating whether the attribute is safe for massive assignments.

public boolean offsetExists(mixed $offset)
$offset	mixed	the offset to check on
{return}	boolean

Returns whether there is an element at the specified offset. This method is required by the interface ArrayAccess.

public mixed offsetGet(integer $offset)
$offset	integer	the offset to retrieve element.
{return}	mixed	the element at the offset, null if no element is found at the offset

Returns the element at the specified offset. This method is required by the interface ArrayAccess.

public void offsetSet(integer $offset, mixed $item)
$offset	integer	the offset to set element
$item	mixed	the element value

Sets the element at the specified offset. This method is required by the interface ArrayAccess.

public void offsetUnset(mixed $offset)
$offset	mixed	the offset to unset element

Unsets the element at the specified offset. This method is required by the interface ArrayAccess.

public void onAfterConstruct(CEvent $event)
$event	CEvent	the event parameter

This event is raised after the model instance is created by new operator.

public void onAfterValidate(CEvent $event)
$event	CEvent	the event parameter

This event is raised after the validation is performed.

public void onBeforeValidate(CModelEvent $event)
$event	CModelEvent	the event parameter

This event is raised before the validation is performed.

public void onUnsafeAttribute(string $name, mixed $value)
$name	string	the unsafe attribute name
$value	mixed	the attribute value

This method is invoked when an unsafe attribute is being massively assigned. The default implementation will log a warning message if YII_DEBUG is on. It does nothing otherwise.

public array rules()
{return}	array	validation rules to be applied when validate() is called.

Returns the validation rules for attributes.

This method should be overridden to declare validation rules. Each rule is an array with the following structure:

array('attribute list', 'validator name', 'on'=>'scenario name', ...validation parameters...)

where

• attribute list: specifies the attributes (separated by commas) to be validated;
• validator name: specifies the validator to be used. It can be the name of a model class method, the name of a built-in validator, or a validator class (or its path alias). A validation method must have the following signature:

  // $params refers to validation parameters given in the rule
  function validatorName($attribute,$params)
  

  A built-in validator refers to one of the validators declared in CValidator::builtInValidators. And a validator class is a class extending CValidator.
• on: this specifies the scenarios when the validation rule should be performed. Separate different scenarios with commas. If this option is not set, the rule will be applied in any scenario that is not listed in "except". Please see scenario for more details about this option.
• except: this specifies the scenarios when the validation rule should not be performed. Separate different scenarios with commas. Please see scenario for more details about this option.
• additional parameters are used to initialize the corresponding validator properties. Please refer to individual validator class API for possible properties.

The following are some examples:

array(
    array('username', 'required'),
    array('username', 'length', 'min'=>3, 'max'=>12),
    array('password', 'compare', 'compareAttribute'=>'password2', 'on'=>'register'),
    array('password', 'authenticate', 'on'=>'login'),
);

Note, in order to inherit rules defined in the parent class, a child class needs to merge the parent rules with child rules using functions like array_merge().

public void setAttributes(array $values, boolean $safeOnly=true)
$values	array	attribute values (name=>value) to be set.
$safeOnly	boolean	whether the assignments should only be done to the safe attributes. A safe attribute is one that is associated with a validation rule in the current scenario.

Sets the attribute values in a massive way.

public void setScenario(string $value)
$value	string	the scenario that this model is in.

Sets the scenario for the model.

public void unsetAttributes(array $names=NULL)
$names	array	list of attributes to be set null. If this parameter is not given, all attributes as specified by attributeNames will have their values unset.

Sets the attributes to be null.

public boolean validate(array $attributes=NULL, boolean $clearErrors=true)
$attributes	array	list of attributes that should be validated. Defaults to null, meaning any attribute listed in the applicable validation rules should be validated. If this parameter is given as a list of attributes, only the listed attributes will be validated.
$clearErrors	boolean	whether to call clearErrors before performing validation
{return}	boolean	whether the validation is successful without any error.

Performs the validation.

This method executes the validation rules as declared in rules. Only the rules applicable to the current scenario will be executed. A rule is considered applicable to a scenario if its 'on' option is not set or contains the scenario.

Errors found during the validation can be retrieved via getErrors.